Almaden Minerals (“Almaden” or “the Company”) (TSX: AMM) (NYSE MKT: AAU) is pleased to report on the Company’s 100% owned Ixtaca gold-silver deposit located in Puebla State, Mexico and the progress of its on-going Pre-Feasibility (“PFS”) level metallurgical test work program.

The 2016 metallurgical test work has focused on continued optimization of the gravity and flotation concentration circuits, and of leach reagent consumption rates. Results reported today are consistent with the Amended Preliminary Economic Assessment (PEA) overall recovery projections of 90% gold and 90% silver for the limestone domain (see January 22nd, 2016 press release). The limestone domain represents approximately 90% of the total metal produced under the Amended PEA. Key parameters and results of the 2016 limestone test work completed to date include the following:

  • A limestone sample was collected using 131 meters (659 kilograms) of continuous whole drill core from inside the planned open pit mine with an average sample grade of 0.76 g/t gold and 36 g/t silver. The sample was collected from the planned start-up pit area and represents limestone mill feed grades anticipated in the first 5 years of mining.
  • Optimised gravity concentration conditions have resulted in gravity concentration gold recoveries of approximately 50% and silver recoveries of approximately 30% at a grind size of 75 microns. This is a significant improvement from previous gravity concentration tests. The gravity tests used a lab-scale version of the Falcon gravity concentrators already included in the optioned Rock Creek processing plant.
  • Flotation mass pulls have been reduced (higher grade concentration) to less than 10% while maintaining combined gravity/flotation gold and silver recoveries in excess of 90%;
  • Leach tests on gravity and flotation concentrates are consistently achieving reduced leach reagent consumptions with NaCN consumptions reduced to less than 1.0 kg per tonne of ore and lime consumption reduced to less than 0.2 kg per tonne ore.

Ongoing limestone metallurgical test work will focus on demonstrating the repeatability of the above gravity and flotation results, and continuation of the leach circuit optimization program. Test work will then expand to the smaller metallurgical domains (Volcanics and Black Shale).

The results received to date also continue to confirm the suitability of the Rock Creek crushing/grinding/gravity/leach processing facilities (secured by the Company through an option to purchase agreement) as well as the assumptions and flowsheet design of the 2016 Amended PEA. The work is being carried out at McClelland Laboratories in Reno Nevada, under the supervision of independent engineers Moose Mountain Technical Services. Tracey Meintjes, P.Eng. of MMTS, a qualified person under the meaning of NI 43-101 reviewed the technical information in this news release. The Ixtaca deposit gold and silver mineralisation occurs as electrum (a gold/silver alloy) and gold and silver bearing sulphides in epithermal veins and veinlets cutting carbonate (limestone and shale) and volcanic rocks. There is negligible disseminated mineralisation in the carbonate rocks which host the majority of the gold and silver vein mineralisation, the remainder of which occurs in the overlying altered volcanic ash units. Gold and silver mineralogy vary little within domains and grade varies according to the density of veining. The detailed mineralogy and geologic observations carried out before metallurgical test work indicated the opportunity to pre-concentrate electrum and precious metal bearing sulphides to create a gold silver concentrate. The three prior rounds of metallurgical test work, and the work reported today, confirm a likely flow sheet of gravity and flotation to produce a concentrate for subsequent leaching to create a gold-silver doré.

About the Ixtaca Deposit PFS Program

The Company has selected independent engineers Moose Mountain Technical Services (“MMTS”) and Knight Piesold Ltd. (“KP”) to prepare a PFS study. Development related activities are currently underway, including advanced engineering and environmental baseline studies to meet the requirements of a PFS and the submittal of an environmental permit application and risk assessment to the Mexican regulatory agency responsible for mine permitting.

To date Almaden has completed or initiated the following studies:

• Hydrological studies including the drilling o